Spiral Stabilizer
BHA Stabilization Tools
Introduction
Spiral stabilizers hold the string on gauge while limiting how much of the tool touches the wellbore wall at any one time.
Machined as a single body with helically wound blades set at full- gauge OD, spiral stabilizers keep the string centered as they rotate, without the long, flat wall contact of a straight-blade design. The wrap moves the contact point around the wellbore continuously rather than holding it in one place.
DTI stocks spiral stabilizers in steel and non-magnetic material, for string and near-bit positions, spanning 4-1/16" to 17-3/8" gauge sizes and connections from 2-3/8 REG through 7-5/8 REG.
Steel and Non-Magnetic, One Range
Standard 4145H alloy steel for general string use, non-magnetic stainless grades for near-bit placement and MWD-sensitive intervals.
String and Near-Bit Coverage
Spiral stabilizers rented for both positions in the string, not just one.
Full Size and Connection Range
Gauge sizes from 4-1/16" to 17-3/8", connections from 2-3/8 REG up to 7-5/8 REG, covering the full spread of collar and pipe sizes in a string.
How It Works
Contact That Moves Instead of Dragging
A stabilizer must hold the string on gauge without turning into a point of friction or sticking risk itself. The more of its surface that stays in constant contact with the wellbore wall, the more that risk grows.
The spiral blades wrap around the body at an angle, so as the string rotates, each blade's contact with the wellbore moves rather than staying fixed in place. The stabilizer still holds full-gauge OD and keeps the string centered, but no single stretch of wall carries sustained contact the way it would against a straight blade.
Related solutions
Further enhance your wellbore quality
Drive drilling efficiency with advanced wellbore solutions
View all productsDome Hybrid Reamer
Stabilize & Ream on Demand
A dual-function tool that stabilizes the BHA during normal drilling and only reams where the hole calls for it.
ClearPath™ Stabilizer
Next-Generation Stabilization
Dome-shaped, low-friction blades centralize the BHA while reducing torque, drag, and torsional vibration, a direct spiral-blade replacement.
ClearPath™ Sleeve
Wellbore Conditioning Sleeve
A non-rotating stabilizer sleeve that delivers 360° wellbore contact, reducing torque, drag, and vibration while supporting higher ROP.
MechLok®
Lockable Drill Pipe Swivel
Mechanically lockable swivel that rotates pipe above the liner, reducing drag and buckling to push completions to depth.
TurboCaser®
High-Speed Reaming System
A pass-through, turbine-powered reamer shoe system that lands casings and intermediate liners at target depth, no string rotation required.
TurboRunner®
Completion Running System
Turbine-powered reaming that lands completions, liners, and casings at target depth, gentle on delicate and intelligent strings.
Drill-N-Ream®
Ultimate Wellbore Conditioning Tool
Reduce torque and drag, extend your lateral reach, and eliminate the need for dedicated reamer runs.